Fendt Chassis-Organizer

Remove the handle on the mudguard on the right-hand side of the vehicle.
Put the handle with the screws in a safe place.
Screw the new, shorter screws from the delivery into the holes.

Open the catches and fold up the cover.

Remove these three screws and this cover.

Loosen the 4 screws and remove the tank cover.

Now enlarge these 4 holes on the tank cover using a drill bit with an 18mm diameter bit.

Now insert the 4 distance sleeves included in the scope of delivery into the drilled holes.

Put the tank cover back on the tank and place the chassis organiser on the tank, positioning it as shown in the picture.

Now screw the chassis organiser and the tank cover together under the specified tightening point.

Please use the indicated holes to attach the attachments.

The watertank can be attached either horizontally (A) or vertically (B) to the direction of travel.

Hier stehen ein paar Wörter, wie die Halterung montiert wird, in 2 Richtungen, und wie der Wasserkanister richtig befestigt wird.

Hier steht bla bla dazu, wie diese Toolbox montiert wird und auf was man achten muss

Hier finden sie bla bla dazu, wie man die Hitchbracket montiert und auf was man achten sollte

Attention: when carrying a hitch, make sure that it is properly locked in the holder.